Does Lutron work with SmartThings hub?

Lutron devices will work with SmartThings in 2017 — but you’ll still need the Lutron Bridge plugged into your router. You won’t, however, be able to use the SmartThings Hub to replace your Lutron Bridge the way you can with the Wink Hub.

How do I add Lutron to SmartThings?

Install your Caséta system, connect it to your Wi-Fi router, and download the Lutron App. Download and install the free Samsung SmartThings app and set up your SmartThings system. , Caséta and Lutron are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries.

How do I pair my Lutron Pico remote?

Press and hold the “Off” button on the dimmer/switch you wish to pair the Pico remote to for 6 seconds until the green indicator lights on the unit begin to flash, then release. This will place the device in pairing mode.

Can Lutron Pico remote control multiple switches?

With a bridge you can pair multiple Picos to a switch/dimmer. On a non-bridge system, you can have up to 10 Pico remotes control 1 dimmer. The only way to control 2 different dimmers independently from one Pico would be to use the 2-group 4-button Pico.

What Hub works with Lutron?

Wink Hub 2 now supports the full line of Lutron Caséta Wireless switches and dimmers. In addition, both the Wink Hub and Wink Hub 2 now support the two-button (PJ2-2B) remote. With Wink + Lutron, you can easily set the lighting to match your mood or turn off lights left on from afar using the Wink app.

Do you need hub for Lutron Caseta?

The Lutron Caseta brand is known for having some of the best smart light switches and dimmers to turn your old-school light bulbs into smart lights. If you purchase a kit, they usually come with a hub called the Smart Bridge to be used with the devices.

How do you program a pico remote?

To un-pair a previously paired Picotap the OFF buttonon the Pico three times, on the third tap hold for 6 seconds and then tap three more times. This will remove all dimmers/switches it was previously paired with.

How long do Pico remote batteries last?

10 years
How long does the Pico remote battery last? The CR2032 coin cell lithium battery in the Pico remote will last for 10 years.

Do you need a hub for Lutron Caseta?

Does Lutron Caseta require a hub?

Since Caseta devices use Lutron’s proprietary Clear Connect RF wireless protocol, the hub is required in order to connect the switches to your network. This is pretty easy.

Does Lutron Caseta work without bridge?

Caséta dimmers & switches are able to communicate directly to Lutron Pico remotes and do not require a bridge or wifi to function.

Are there any Lutron picta remotes for SmartThings?

Thanks to @njschwartz, @BHO, @stephack, @Paul_Sheldon, @dalec and @bravenel, SmartThings users now have the ability to program inexpensive Lutron Caséta Pico remotes in a way that hasn’t been available to consumers since the introduction of the now, ill-fated Staples Connect hub.

Can a Pico remote show up on SmartThings?

If you don’t, they will all show up as “Pico”, and configuring multiple remotes will be confusing. If you have Lutron devices and you want to utilize their scenes, you can add them here and they’ll be available to you in SmartThings, otherwise you can tap Done.

How much does a Lutron Caseta pro Smartbridge cost?

If you have the patience to follow these step by step directions, you can setup a low cost bridge between SmartThings and a Lutron Caséta Pro SmartBridge that will let you program up to 50 Lutron Caséta Pico remotes to easily control just about anything you want, for just $15-$20 per remote.

How many Pico Remote buttons are there on Lutron pj2-3brl?

All 5 of the Lutron PJ2-3BRL Pico remote buttons are accessible, with up to two automations per button.