How configure IP SLA in Cisco ASA?


  1. Create nat rules for traffic routed out of the primary and secondary interfaces.
  2. Schedule the SLA process to start immediately with a lifetime of forever.
  3. Create a track ID, the “rtr” references the SLA ID.
  4. Define a default route via the PRIMARY interface, referencing the track object.

Does the Cisco ASA 5505 have a GUI?

You configure the ASA by using ASDM. ASDM is a graphical interface that allows you to manage the ASA from any location by using a web browser.

How do I FTP to Asa?

Using FTP

  1. Enter the following command: copy ftp://[username[:password]@][/path]/filename {flash:/ | disk0:/ | disk1:/ } [path/] filename.
  2. ASA will confirm the server and filename, review each and press enter:
  3. If the ASA can communicate with FTP server, you should see a bunch of !!!!!!!

What is IP SLA in networking?

IP SLA (Internet Protocol Service Level Agreement) is an active computer network measurement technology that was initially developed by Cisco Systems. IP SLA is used to track network performance like latency, ping response, and jitter, it also helps us to provide service quality.

How do I access Cisco ASA firewall?

Open the shortcut and fill in the IP address (192.168. 1.1), leave the username blank and put in the password firewall. The ASDM will then connect to the ASA and load the java interface. You can now configure the ASA as per your requirements.

How configure Cisco ASA 5505 firewall?

Cisco ASA 5505 configuration

  1. Step1: Configure the internal interface vlan.
  2. Step 2: Configure the external interface vlan (connected to Internet)
  3. Step 3: Assign Ethernet 0/0 to Vlan 2.
  4. Step 4: Enable the rest interfaces with no shut.
  5. Step 5: Configure PAT on the outside interface.
  6. Step 6: Configure default route.

What is Cisco ASA code?

In computer networking, Cisco ASA 5500 Series Adaptive Security Appliances, or simply Cisco ASA, is Cisco’s line of network security devices introduced in May 2005, that succeeded three existing lines of popular Cisco products: Cisco IPS 4200 Series, which worked as intrusion prevention systems (IPS).

What is Active FTP?

Active FTP : In the active mode, the client connects on a random port for incoming data connections from the server. Client again sends next port to FTP server which is acknowledged on command channel.

What port is FTP?

port 21
FTP is an unusual service in that it utilizes two ports, a ‘data’ port and a ‘command’ port (also known as the control port). Traditionally these are port 21 for the command port and port 20 for the data port.