How do I update firmware on Smart Array?

Follow the steps below to obtain the software:

  1. Click the following link:
  2. Enter a product name (e.g., “HP Smart Array P822/2GB FBWC”) in the text search field and wait for a list of products to populate.
  3. From the Drivers & software dropdown menus on the left side of the page:

Where is Smart Array controller firmware version?

Re: find the smart-array firmware version First, run “hpacucli ctrl all show” to see the slot identifier(s) for the controller(s). Then, run “hpacucli ctrl slot= show” to see information about the specified controller. The firmware version number should be in there.

How do I update my HP RAID controller firmware?

The server firmware can be updated using a ROMPaq boot Diskette. Download the Server ROMPaq file from the HPE Business Support Center. Run the download file to create the ROMPaq boot Diskette.

What is the maximum logical drives supported on P420 controller when it is operating in ZMR?

Given the increasing need for high performance and rapid capacity expansion, the SA-P420 Controller offers: Up to 240TB of total internal storage with 60 x 4TB LFF SATA hard drives.

How do I check my RAID controller firmware Windows?


  1. Open an administrator command prompt. Click Start. In the Start Search box, type cmd, and then press Ctrl+Shift+Enter.
  2. In the command window, type the following command: wmic diskdrive get caption, firmwarerevision.

Does iLO firmware update require a reboot?

iLO firmware upgrade over the web does not require a reboot of the host system.

How do I update bl460c firmware?

Log into the OA CLI interface as an Administrator.

  1. OA> show update. This will show current and available firmware versions for programmable devices.
  2. OA> update device icbay This will update the specified interconnect bay, note that bay1 is 1A, etc., as shown in the previous command.
  3. OA> show update.

What is Smart Array P420i controller?

The HPE Smart Array P420i Controller is a low profile, 6 Gb/s, PCIe 3.0, Serial Attached SCSI (SAS) RAID controller that provides enterprise class, storage performance and data protection for select HPE ProLiant Gen8 rack servers and tower servers.

How do I enable a failed logical drive in ACU?

Logical Drive can be re-enabled in following ways: 1. Boot Server with SmartStart CD, open ACU, and re-enable logical drive. 2. Get into BIOS while booting the server, choose the Logical Drive and press F1 to re-enable the logical drive.

What is firmware in Device Manager?

System firmware is responsible for providing critical boot and runtime services to the system as a whole, and device firmware is associated with a particular device integrated into a system. A firmware update is a software program that can be used to update the firmware in these devices.

How do I know if my firmware is UEFI?

In Windows Search, type “msinfo” and launch the desktop app named System Information. Look for the BIOS item, and if the value for it is UEFI, then you have the UEFI firmware. If it says BIOS Legacy, then that’s the firmware you’re running.

Is there firmware update for smart array p420i?

For the test, I will update the Smart Array P420i firmware on the HPE DL380p G8 server. In the search type “HPE Smart Array P420i Controller”, select “Software Type: Firmware” and “Software Version: Drive Controller”.

Can a smartarray P420 RAID card be flashed?

12-15-2019 08:59 AM – edited ‎12-15-2019 09:00 AM since the p420 card was used in servers not consumer/workstations systems you want HP enterprise not this site (HP Inc) note that some of the enterprise raid cards cannot be flashed unless they are still in a supported server

Is there a firmware upgrade for the HP P420 SAS controller?

Because HP is now requesting money for some of their software and updates, i had to use a live Ubuntu 14.04 x64 disc in order to upgrade the firmware for HP P420 SAS Controller. I needed to try this update because on my HP ML310e Gen8 v2 servers (i have two), the controller is not initalised at cold boot. The problem is described here.

Why is my HP Smart array P420 controller not working?

When executing kdump on systems running in Zero Memory RAID (ZMR) mode, the controller might halt. When an HP Smart Array P420 controller was attached to both an expander backplane and non-expander backplane, the controller would not properly control SmartCarrier LEDs. Chkdsk was running slowly.