Will a T5 bolt to a LT1?

If the T5 came from a SS/Z28 with the 305 v-8 then it will bolt right up to the lt1.

How much horsepower can you get out of a LT1?

In contrast, the 376-cubic-inch (6.2L) LT1 offered in the 2016 Corvette Stingray is rated at 460 horsepower with the optional exhaust system.

What transmission goes with LT1?

Chevrolet Performance has adapted the production-based 8L90-E eight-speed automatic transmission for use with our LT1, LT4, and LT5 crate engines.

Is the LT1 a good motor?

Its lighter, costs nearly as little, makes more power, and has just as big of an aftermarket. The LT1 is a great engine, but the LS1 is an amazing engine. There’s are reason the LS1 is one of the most talked about engines in the entire world.

Will a 4L60E bolt up to a LT1?

10 Thankfully the stock 4L60E will bolt up to the LS1, though it uses a different plug and converter than the LS1 version. Some transmission builders may let you exchange your LT1 unit for an LS1.

Is the 6.2 LT1 a good engine?

In fact, it’s the highest base horsepower and torque engine that GM’s ever produced for the Corvette, as well as the most efficient. One of the most technologically advanced engines in the world, the LT1 also represents the most significant redesign of the small-block ever.

Is the LT1 engine reliable?

Chevy LT1 Engine Reliability Overall, the LT1 is a very reliable engine. The OptiSpark distributor problem is really the only issue that is pretty much guaranteed to happen on this engine. Head gaskets are generally good so long as the engine isn’t overheated.

How much horsepower does a 5.7 LT1 engine have?

370 horsepower
LT1 legacy Displacing 350 cubic inches (5.7L), with a compression ratio of 11:1, it was rated at 370 horsepower at 6,000 rpm and 380 lb. -ft. of torque at 4,000 rpm.

Why do Chevy transmissions fail?

The problem can be low transmission fluid, bad shift solenoid, wiring problem, or PCM issue. It may also be a bad throttle position sensor and even clogged catalytic converter. Why does my Chevy transition make noise when placed in Drive or Reverse?