How do you add a Z-wave device to IQ Panel 2?
IQ Panel 2 – Add Z-Wave Device
- Press or swipe down clock display at top for Settings Tray then press SETTINGS.
- Press ADVANCED SETTINGS then enter Installer Code 1111.
- Press INSTALLATION then DEVICES.
- Press ADD DEVICE then PAIR.
- IQ Panel 2 enters Z-Wave learn mode.
Does IQ panel have a camera?
The panel has a 5MP camera that takes photos of each arm/disarm and alarm event, so you can review each activity, whether a valid password is used or not.
How do I connect my IQ panel to my camera?
Enable panel streaming. Find the camera you want to stream to the IQ Panel 2 System, and click on the gear icon in the upper-right corner. This is the settings button. Choose “Stream Video to Security Panel Screen”. Check the “View at the Panel” box, and press the blue save button.
How do I add a device to Z-Wave?
To add a Z-Wave device:
- Go to the Z-Wave control panel.
- Click Add Node in the Z-Wave Network Management card, or Add Node Secure for secure devices like locks.
- Activate your device by following the instructions provided with it.
- Make sure the device is in its final location, then click Heal Network.
What are Z-Wave devices?
Z-wave technology creates a wireless mesh network, which is a collection of devices that link up and communicate with each other without wires. With Z-wave technology, devices “mesh” together by sending signals over low-energy radio waves on a dedicated frequency.
What are Z-wave devices?
Does IQ panel record video?
We gotta say, we’re extremely pleased with the crystal clear recording capabilities, and we’re sure that you will be too! Streaming video directly to the panel from Alarm.com is a feature available for both the standard Qolsys IQ Panel 2 and the Qolsys IQ Panel 2 Plus Systems.
How do you put an IQ on a doorbell camera?
Connecting the Skybell to built-in Access Point – Qolsys IQ 2
- From the Alarm.com app and go to drop-down menu – select Doorbell Camera.
- Add Doorbell Camera.
- Select Begin.
- Name your doorbell device.
- Go to your Wifi settings on your phone and select the Skybell Wifi.
- Connect to the open network on your phone.
How do I disarm my iq2 panel?
To remotely disarm your panel, login to your mobile app and touch the “disarm” icon. You can connect your smartphone using Bluetooth and it will automatically disarm your IQ Panel from an “Armed Away” state when it comes within range.
How do I add Z-Wave devices to my home assistant?
How do I stream video to my IQ Panel 2?
Navigate to the Video Menu on the left side of the screen. Find the camera you want to stream to the IQ Panel 2 System, and click on the gear icon in the upper-right corner. This is the settings button. Choose “Stream Video to Security Panel Screen”. Check the “View at the Panel” box, and press the blue save button.
How does the IQ2 work on a TV?
Running on a full mobile operating system the IQ2 connects to the IQ Panel through WiFi and can be upgraded over the air as new software upgrades are released. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.
What can you do with the IQ2 tablet?
The IQ2 is a secondary tablet for the IQ Panel, providing you with up to three additional keypads inside your home or small business. Not only does it provide a way to arm and disarm your IQ Panel and see sensor status, but it gives you the features you don’t get in your mobile app like chiming, emergency panics, and a siren.
How does the IQ2 connect to the IQ panel?
Running on a full mobile operating system the IQ2 connects to the IQ Panel through WiFi and can be upgraded over the air as new software upgrades are released.