Can you turbo a RB25?
Yes, you can turbo any RB… even a RB20E if you can find the manifold to do so! The most important part to gain power while keeping it all safe is the tune and tuner. You can chip your stock ECU but a stand alone ECU is best.
How much HP does an RB25 have?
Nissan RB25 engine specs
|Power output||132 kW (180 HP) at 6,000 rpm 140 kW (190 HP) at 6,400 rpm 147 kW (200 HP) at 6,400 rpm 173 kW (235 HP) at 6,400 rpm 180 kW (245 HP) at 6,400 rpm 184 kW (250 HP) at 6,400 rpm 206 kW (280 HP) at 6,400 rpm 206 kW (280 HP) at 6,400 rpm|
What turbo does a RB25DET use?
The RB25DET turbocharger employs a 60mm compressor inlet and a 38mm discharge nozzle. The compressor housing is identified with a 0.40 A/R. On the exhaust side, the turbine inlet passage is 65 x 45mm and the mounting flange measures 110 x 70mm.
Is the RB25 a I6?
RB25DE (2.5L I6 NA/T) The RB25 series of engines was first introduced in the R32 Nissan Skyline GTS25 sedan and coupe models.
Can you turbo a RB30?
No worries to turbo an NA RB30, I drove mine around for over 2 years including skidpan days, towing and normal driving, using the NA injectors and ECU running standard boost on a T3 and 98 PULP. Provided your motor is healthy you should have no problems doing the same.
Is the RB25DET a good motor?
Overall, the RB’s are generally extremely reliable engines and a healthy powerplant will certainly be more than happy to provide you with durability right the way up to 400hp on stock internals.
What’s the difference between RB25 and RB26?
The main difference between RB25 and RB26 is in terms of the power capacity of each engine version. While RB25 engines operate on hydraulic lifters, the improved RB26 version uses solid lifters. The RB25 engines used a single throttle body, whereas its successor- the RB26- operates on 6 throttle bodies.
Which RB motor is the best?
Designed with high performance and racing in Group A competition as its primary objective, Nissan engineers equipped the Skyline with the largest and most powerful version of its RB engine series, the RB26DETT. The inline six-cylinder engine is based on an iron block and an aluminum cylinder head.
How much power can a rb30 handle?
With an aftermarket ecu and a very good tune the standard internals can handle high boost. If your talking about using a standard To3, vl turbo ecu and injectors and a fmic you can run about 7-10psi.