What type of spark plug does a Yamaha Blaster take?

NGK Resistor Sparkplug BR8ES for Yamaha BLASTER 200 2001-2006.

What is the spark plug gap for a Yamaha Blaster?

0.032″
Standard Spark Plug by NGK®. Gap: 0.032″.

Can you use blaster on spark plugs?

The spark plug has a gas tight seal, by design, where it contact the head on the outside. You can spray anything you want in there and it will NEVER penetrate the threads.

What kind of oil goes in a Yamaha Blaster?

What kind of oil does a Yamaha Blaster take? ATF or gear oil or ideally a specialty motorcyle oil designed for 2-stroke gearboxes like Motul Transoil 10w30. For wet clutches thinner is better, and synthetic has some issues. Do NOT use 10w30 motor oil, especially if it says: “Energy Saving”.

What size socket do I need for NGK spark plugs?

Most spark plugs require a 5/8″ (16mm) size spark plug socket.

Can you use PB Blaster on stuck spark plugs?

PB Blaster. Can be found at Pep Boys, Autozone, Advance Auto, Napa, etc. Spray a nice amount down into your spark plug hole, and let it sit for a couple of hours. Then, very carefully go back and forth with a socket, to get it to loosen.

Will a PB Blaster loosen spark plugs?

Http://www.top5autorepairs.com Use PB Blaster to help loosen stubborn stuck spark plugs.

What’s the difference between BR9ES and BR8ES?

The heat range of a spark plug is indicated by the number in the plug’s identification sequence. On NGK spark plugs, the lower the number the hotter the plug (higher numbers are colder). Thus, your NGK BR9ES is colder than a BR8ES.

What is the best gear oil for a Yamaha Blaster?

best Active Member ATF or gear oil or ideally a specialty motorcyle oil designed for 2-stroke gearboxes like Motul Transoil 10w30. For wet clutches thinner is better, and synthetic has some issues. Do NOT use 10w30 motor oil, especially if it says: “Energy Saving”. It will eventually burn your clutch out.