How do I reset my Viqua ice controller?

Firstly, turn off your UV ballast from the power. Now hold down the reset button on the side, keep it held down. Now turn the main power back on. Yes, you still have the reset button held.

Why is my electronic ice controller beeping?

If it’s not your water quality, and the sensor is clean (if you have one), you’ve replaced the lamp, reset the timer and it still keeps beeping, the ballast is faulty and needs replacement.

How often do UV lamps need to be replaced?

every 9000 hours
Typically, a UV lamp being used primarily to disinfect the air circulating through a home or small office should be replaced every 9000 hours or approximately every 12 months.

Why is my water filtration system beeping?

Maintenance. The previous lifespan of a cold water filter cartridge was 6 months. If you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear. This will reset the alarm for a complete 6 months.

Why does my ultraviolet light keep beeping?

With UV Dynamics systems the UV power source (or ballast) will emit a solid three-second beep indicating that the reset was successful. Occasionally, after a power failure, you may get beeping, unplug the controller, wait one minute and plug it back in, if that doesn’t fix it try to reset the ballast.

Why is my UV light beeping?

How do you clean Viqua quartz sleeves?

Clean the quartz sleeve with a cloth soaked in CLR, vinegar or some other mild acid and then rinse with water. Note: If sleeve cannot be cleaned completely or it is scratched or cracked, then replace the sleeve. Insert new O-rings and tighten the sleeve bolt to the quartz sleeve.

How do I know if my UV light is still good?

If it turns a violet shade, the UV light bulb is functioning. If it remains primarily white, the UV light bulb might be defective. If you are unsure, transfer the bulb to another light fixture and try the same test again. If it still fails, the light bulb is not good.

Are there any warranties on viqua UV controllers?

All VIQUA UV systems come with comprehensive warranties on controllers, electrical components, and chambers. Our Commitment VIQUA is committed to ensuring your experience with our products and organization exceeds your expectations. We have manufactured your UV disinfection system to the highest quality standards.

Where is the reset button on a viqua UV controller?

Although I’m talking about a BA-ICE-S ballast, the instructions are the same for the SP Platinum series as well, your reset button is the little display window on top. Firstly, turn off your UV ballast from the power. Now hold down the reset button on the side, keep it held down.

What makes a viqua lighting system so good?

VIQUA systems are third-party validated ensuring e˚ective output and disinfection. Tested and proven system performance ensures disinfection is always achieved. VIQUA lamps are LongLife coated for stability, longer life and increased efficiency. Even lamps that look the same will not perform the same.

How to contact viqua technical support for a problem?

1. Contact the VIQUA Technical Support team at 1.800.265.7246 or [email protected]. 2. Provide the model, the date of purchase, and a description of the product. 3. A VIQUA technician will help you troubleshoot the problem. 4. You will be advised whether a failed part needs to be returned to VIQUA.